KSEEB SSLC Class 10 Science Solutions Chapter 12 Electricity

In this chapter, we provide KSEEB SSLC Class 10 Science Solutions Chapter 12 Electricity for English medium students, Which will very helpful for every student in their exams. Students can download the latest KSEEB SSLC Class 10 Science Solutions Chapter 12 Electricitypdf, free KSEEB SSLC Class 10 Science Solutions Chapter 12 Electricity book pdf download. Now you will get step by step solution to each question.

Karnataka SSLC Class 10 Science Solutions Chapter 12 Electricity

KSEEB SSLC Class 10 Science Chapter 12 Intext Questions

Text Book Part I Page No. 94

KSEEB Solutions For Class 10 Science Question 1.
What does an electric circuit mean?
Answer:
A continuous and closed path of an electric current is called an electric circuit.

KSEEB Solutions For Class 10 Science Electricity Question 2.
Define the unit of current.
Answer:
The SI unit of electric current is ampere (A).
When I coulomb of electric charge flows through any cross. Section of a conductor in I second, the electric current flowing through it is said to be 1 ampere.
∵ 1 ampere = 1C/1s

Electricity Class 10 Notes KSEEB Question 3.
Calculate the number of electrons constituting one coulomb of charge.
Answer:
The SI unit of electric charge is column, which is equivalent to the charge contained in nearly 6 × 1018 electrons.

Text Book Part I Page No. 96

Electricity Class 10 KSEEB Solutions Question 1.
Name a device that helps to maintain a potential difference across a conductor.
Answer:
Voltmeter.

KSEEB Solutions Science Class 10 Question 2.
What is meant by saying that the potential difference between two points is 1 V?
Answer:
One Volt is the potential difference between two points in a current-carrying conductor when 1 joule of work is done to move a charge of 1 coulomb from one point to the other.
KSEEB 10th Science Solutions
1 V = 1 Jc-1

Question 3.
How much energy is given to each coulomb of charge passing through a 6 V battery?
Answer:
W = VQ
= 6 × 1 = 6 joules
Hence 6 joules of energy is given to each coulomb of charge passing through a 6 V battery.

Text Book Part I Page No. 103

Question 1.
On what factors does the resistance of a conductor depend?
Answer:
The resistance of the conductor depends

  1. on its length
  2. on its area of cross section and
  3. on the nature of its material.

KSEEB Solutions For Class 10 Physics Question 2.
Will current flow more easily through a thick wire or a thin wire of the same material, when connected to the same source? Why?
Answer:
Resistance, (mathrm{R} alpha frac{1}{mathrm{A}}). The resistance of a conductor is inversely proportional to its area of cross-section. A thick wire has a greater area of cross-section whereas a thin wire has a smaller area of cross-section. Thus, thick wire has less resistance and a thin wire has more resistance therefore current will flow more easily through a thick wire.

Electricity Notes KSEEB Question 3.
Let the resistance of an electrical component remains constant while the potential difference across the two ends of the component decreases to half of its former value. What change will occur in the current through it?
Answer:
As per ohm’s law, V = IR
(mathrm{I}=frac{mathrm{V}}{mathrm{R}}) —— (i)
Potential difference is half
KSEEB Solutions For Class 10 Science Electricity
∴ Current flowing is also half of ts former value.

KSEEB Class 10 Science Solutions Question 4.
Why are coils of electric toasters and electric irons made of an alloy rather than a pure metal?
Answer:
a) Resistivity of iron = 10.0 × 10-8
Resistivity of Mercury = 94.0 × 10-8
Resistivity of an alloy is greater than iron. By this we conclude that, Iron is good conductor of heat comparing to Mercury.
b) Resistivity of silver is less, hence it is a good conductor of heat.

Text Book Part I Page No. 107

KSEEB Science Solutions Question 1.
Draw a schematic diagram of a circuit consisting of a battery of three cells of 2 V each, a 5 Ω resistor, an 8Ω resistor, and a 12Ω resistor, and a plug key, all connected in series.
Answer:
Rs = R1 + R2 + R3
= 2V + 2V + 2V
= 6W
Electricity Class 10 Notes KSEEB

KSEEB Solutions For Class 10th Science Question 2.
Redraw the circuit of Question 1, putting in an ammeter to measure the current through the resistors and a voltmeter to measure the potential difference across the 12Ω resistor. What would be the readings in the ammeter and the voltmeter?
Answer:
Electricity Class 10 KSEEB Solutions
Resistance, R = 5 + 8 + 12 = 25 Ω
(mathrm{I}=frac{mathrm{V}}{mathrm{R}}=frac{6}{25}=0.24 mathrm{A})
As per ohm’s law =0.24A
V1 = IR
Potential difference
V1 = IR = 0.24 × 12 = 2.88 V.
reading in ammeter = 0.24A
reading in voltmeter = 2.88 v.

Text Book Part I Page No. 110

KSEEB Solutions For 10th Science Question 1.
Judge the equivalent resistance when the following are connected in parallel –
(a) 1 Ω and 106 Ω,
(b) 1 Ω and 103 Ω, and 106 Ω.
Answer:
(a) If two resistances are connected in parallel
KSEEB Solutions Science Class 10
equivalent resistance = 1Ω.
(b) If three resistances 1Ω, 103Ω and 106Ω are connected in parallel,
KSEEB 10th Science Solutions
equivalent resistance = 0.999Ω

KSEEB Science Solutions For Class 10 Question 2.
An electric lamp of 100Ω, a toaster of resistance 50Ω and a water filter of resistance 500Ω are connected in parallel to a 220 V source. What is the resistance of an electric iron connected to the same source that takes as much current as all three appliances, and what is the current through it?
Answer:
Resistance of Electric 1 amp R1 = 100Ω
Resistance of Tosser, R2 = 50Ω
Resistance of water filter, R3 = 50Ω
Potential difference, V = 220V
When these are connected in parallel,
KSEEB Solutions For Class 10 Physics
Electricity Notes KSEEB Class 10
7.04A of electricity is obtained by three appliances
Resistance of an electric iron connected to the same source that takes as much current as all three appliances
KSEEB Class 10 Science Solutions
∴ Resistance of iron box = 31.25Ω
Electricity flowing through this = 7.04A.

Electricity KSEEB Solutions Question 3.
What are the advantages of connecting electrical devices in parallel with the battery instead of connecting them in series?
Answer:
(i) In parallel circuit, if one electrical appliance stops working due to some defect, then all other appliances keep working normally. In series circuit, if one electrical appliance stops working due to some defect, then all other appliances also stop working.

(ii) In parallel circuits, each electrical appliance gets the same voltage as that of the power supply line. In series circuit, appliances do not get the same voltage, as that of the power supply line.

(iii) In the parallel connection of electrical appliances, the overall resistance of the household circuit is reduced due to which the current from the power supply is high. In the series connection, the overall resistance of the circuit increases too much due to which the current from the power supply is low.

KSEEB Solutions For Class 10 Electricity Question 4.
How can three resistors of resistances 2Ω, 3Ω, and 6Ω be connected to give a total resistance of (a) 4Ω, (b) 1Ω?
Answer:
In this diagram 2 resistors of resistance 3W and 3 W are connected in parallel.
KSEEB Science Solutions Class 10
If 2Ω and 2Ω are connected in series 2Ω + 2Ω = 4Ω
∴ Total resistance = 4Ω
If resistors are connected in series
KSEEB Solutions For Class 10th Science
∴ Total resistance = 1Ω

KSEEB Solutions Class 10 Science Question 5.
What is (a) the highest, (b) the lowest total resistance that can be secured by combinations of four coils of resistance 4Ω, 8Ω, 12Ω, 24Ω?
Answer:
(a) If four resistors are connected in series then resistance
= 4 + 8 + 12 + 24
= 48Ω
(b) If these are connected in parallel
KSEEB Solutions For 10th Science
∴ We can get lowest resistance.

Text Book Part I Page No. 112

KSEEB Solutions 10 Science Question 1.
Why does the cord of an electric heater not glow while the heating element does?
Answer:
In cord of an electric heater, as current flows these become hot arid glows but in case of electric heater this will not happen.

KSEEB Science Solutions Class 10 Question 2.
Compute the heat generated while transferring 96000 coulomb of charge in one hour through a potential difference of 50 V.
Answer:
As per Joule’s law H = VIt.
Here V = 50 V.
KSEEB Science Solutions For Class 10

KSEEB Solutions For Class 10 Question 3.
An electric iron of resistance 20Ω takes a current of 5 A. Calculate the heat developed in 30 s.
Answer:
As per Joule’s law
H = VIt
H = IR = 5A × 20Ω = 100V
I = 5A, t = 30 sec.
∴ H = 100 × 5 × 30 J
= 15000 J = 1.5 × 104 J.

Text Book Part I Page No. 114

10th Science Notes KSEEB Question 1.
What determines the rate at which energy is delivered by a current?
Answer:
The rate at which electric energy is dissipated or consumed in an electric circuit is termed as electric power.
P = VI.

KSEEB Sslc Class 10 Science Solutions Question 2.
An electric motor takes 5 A from a 220 V line. Determine the power of the motor and the energy consumed in 2 h.
Answer:
P = VI
V = 220V, and I = 5A.
Power P = 220 × 5 = 1100 W
Power of the motor = P × t
P = 1100 W.
t = 2 Hr 2 × 60 × 60 W
= 7200 S
∴ Energy consumed, E = 1100 × 7200 J
= 7920000
= 7.92 × 106J.

KSEEB SSLC Class 10 Science Chapter 12 Textbook Exercises

KSEEB Solutions For 10th Class Science Question 1.
A piece of wire of resistance R is cut into five equal parts. These parts are then connected in parallel. If the equivalent resistance of this combination is R’, then the ratio (frac { R }{ R` } ) is –
(a) (frac { 1 }{ 25 })
(b) (frac { 1 }{ 5 })
(c) 5
(d) 25
Answer:
(d) 25

KSEEB 10th Science Notes Question 2.
Which of the following terms does not represent electrical power in a circuit?
(a) I2R
(b) IR2
(c) VI
(d) (frac { { V }^{ 2 } }{ R } )
Answer:
(b) IR2

KSEEB Solutions For Class 10 Science In Kannada Medium Question 3.
An electric bulb is rated 220 V and 100 W. When it is operated on 110 V, the power consumed will be –
(a) 100 W
(b) 75 W
(c) 50 W
(d) 25 W
Answer:
(d) 25 W

KSEEB 10 Science Solutions Question 4.
Two conducting wires of the same material and of equal lengths and equal diameters are first connected in series and then parallel in a circuit across the same potential difference. The ratio of heat produced in series and parallel combinations would be-
(a) 1 : 2
(b) 2 : 1
(c) 1 : 4
(d) 4 : 1
Answer:
(c) 1 : 4

KSEEB Solutions For 10 Science Question 5.
How is a voltmeter connected in the circuit to measure the potential difference between two points?
Answer:
Voltmeter is connected in parallel in the circuit to measure the potential difference between two points.

10th Science Notes Pdf State Board Question 6.
A copper wire has diameter 0.5 mm and resistivity 1.6 10-8Ω m. What will be the length of this wire to make its resistance 10Ω? How much does the resistance change if the diameter is doubled?
Answer:
Area of the copper wire A (=pileft(frac{mathrm{D}}{2}right)^{2})
diameter = 0.5 mm = 0.0005 m
Resistance, R = 10W.
KSEEB SSLC Class 10 Science Solutions Chapter 12 Electricity Ex Q 6
Diameter of copper wire is doubled, then diameter = 2 × 0.5 = 1 mm = 0.001 m
KSEEB SSLC Class 10 Science Solutions Chapter 12 Electricity Ex Q 6.1
∴ Length of wire = 122.7 m
Resistance of wire = 2.5 W

Question 7.
The values of current I flowing in a given resistor for the corresponding values of potential difference V across the resistor are given below –

I (amperes)0.51.02.03.04.0
V (volts)1.63.46.710.213.2

Plot a graph between V and I and calculate the resistance of that resistor.
Answer:
In the following graph, voltage is taken along the x-axis and the current is taken along the y-axis. Different values are as follows:

V (volts)1.63.46.710.213.2
I (amperes)0.51.02.03.04.0

KSEEB SSLC Class 10 Science Solutions Chapter 12 Electricity Ex Q 16
Slope indicates Resistance
KSEEB SSLC Class 10 Science Solutions Chapter 12 Electricity Ex Q 7.1
∴ Resistance of the resistor = 3.4Ω.

Question 8.
When a 12 V battery is connected across an unknown resistor, there is a current of 2.5 mA in the circuit. Find the value of the resistance of the resistor.
Answer:
Here I = 2.5 mA = 2.5 × 10-3 A.
∴ (R=frac{12}{2.5 times 10^{-3}})
= 4.8 × 103Ω
= 4.8 K cal.

Question 9.
A battery of 9 V is connected in series with resistors of 0.2Ω, 0.3Ω, 0. 4Ω, 0.5Ω and 12Ω, respectively. How much current would flow through the 12Ω resistor?
Answer:
A battery of 9V is connected in series with resistors 0.2Ω, 0.3Ω, 0.4Ω,
R = 0.2 + 0.3 + 0.4 + 0.5 + 12 = 13.4Ω.
V = 9V
(I=frac{9}{13.4}=0.671 mathrm{A})
∴ 12 V battery, 0.671 A current flows.

Question 10.
How many 176Ω resistors (in parallel) are required to carry 5 A on a 220 V line?
Answer:
Let the resistors be x’
Resistance = 176Ω
As per ohm’s law,
V = IR
KSEEB SSLC Class 10 Science Solutions Chapter 12 Electricity Ex Q 10
KSEEB SSLC Class 10 Science Solutions Chapter 12 Electricity Ex Q 10.1
∴ Four resistors (in parallel) are required to carry 5A on a 220 V line.

Question 11.
Show how you would connect three resistors, each of resistance 6Ω, so that the combination has a resistance of (i) 9Ω, (ii) 4Ω.
Answer:
If resistors are connected in series 6Ω + 6Ω + 6Ω =18Ω This ia not correct
When they are connected in parallel
(frac{1}{6}+frac{1}{6}+frac{1}{6}=3) This is also wrong,
i) When they are connected in parallel
KSEEB SSLC Class 10 Science Solutions Chapter 12 Electricity Ex Q 11
Two 6Ω resistors are connected in parallel
KSEEB SSLC Class 10 Science Solutions Chapter 12 Electricity Ex Q 11.1
If 3rd resistor of 6Ω and 3Ω are connected in series, it becomes 6Ω + 3Ω = 9Ω.
ii) When they are connected in series
KSEEB SSLC Class 10 Science Solutions Chapter 12 Electricity Ex Q 11.2
Resistance = 6Ω + 6Ω
= 12Ω
If 3rd resistor 6Ω is connected to 12Ω in parallel
KSEEB SSLC Class 10 Science Solutions Chapter 12 Electricity Ex Q 11.3
Total resistance = 4Ω.

Question 12.
Several electric bulbs designed to be used on a 220 V electric supply line, are rated 10 W. How many lamps can be connected in parallel with each other across the two wires of 220 V line if the maximum allowable current is 5 A?
Answer:
Here V = 220V
I – 5A
KSEEB SSLC Class 10 Science Solutions Chapter 12 Electricity Ex Q 12
∴ 110 lamps can be connected in parallel with each other across the two wires.

Question 13.
A hot plate of an electric oven connected to a 220 V line has two resistance coils A and B, each of 24Ω resistance, which may be used separately, in series, or in parallel. What are the currents in the three cases?
Answer:
(i) If coils are connected separately V = 220 V
Resistance R1 = 240
As per ohm’s law, V = IR
KSEEB SSLC Class 10 Science Solutions Chapter 12 Electricity Ex Q 13
∴ If coils are connected separately 9.16A electricity flows in the coil.
(ii) If coils are connected in series
Resistance R2 = 24Ω + 24Ω = 48Ω
As per ohm’s law V = IR
KSEEB SSLC Class 10 Science Solutions Chapter 12 Electricity Ex Q 13.1
∴ If coils are connected in series 4.58A electricity flows.

Question 14.
Compare the power used in the 20 resistors in each of the following circuits:
(i) a 6 V battery in series with 1Ω and 2Ω resistors, and
(ii) a 4 V battery in parallel with 12Ω and 2Ω resistors.
Answer:
(i) Potential Difference V = 6V
If 1Ω and 2Ω resistors are connected in series, then Resistance
R = 1 + 2 = 3W.
As per ohm’s law
(mathrm{I}=frac{6}{3}=2 mathrm{A})
P(I2)R = (2)2 × 2 = 8W.
(ii) Potential difference V = 4V
If 12Ω and 2Ω resistors are connected in parallel, voltage is equal
Voltage of resistance 2 W is 4 volts
KSEEB SSLC Class 10 Science Solutions Chapter 12 Electricity Ex Q 14
∴ Power of 2Ω is 8 W.

Question 15.
Two lamps, one rated 100 W at 220 V, and the other 60 W at 220 V, are connected in parallel to electric mains supply. What current is drawn from the line if the supply voltage is 220 V?
Answer:
Both lamps are connected in parallel potential difference = 220 V
Power = V × I.
KSEEB SSLC Class 10 Science Solutions Chapter 12 Electricity Ex Q 15

Question 16.
Which uses more energy, a 250 W TV set in 1 hr, or a 1200 W toaster in 10 minutes?
Answer:
250W TV set in used in 1 Hr, then its energy
= 250 × 3600 = 9 × 105
energy of Toaster = 1200 × 600
If it is used in 10 minutes, then its power = 1200 × 600 × 7.2 × 105 J
∴ Energy of 250 W TV set is used in 1 Hr is greater than 1200 W toaster used in 10 minutes.

Question 17.
An electric heater of resistance 8Ω draws 15 A from the service mains 2 hours.
Calculate the rate at which heat is developed in the heater.
Answer:
P = I2R
R = 8Ω, I = 15A
P= (15)2 × 8 = 1800 J/s.
∴ Rate at which heat is developed in the heater
= 1800 J/s.

Question 18.
Explain the following.
(a) Why is the tungsten used almost exclusively for filament of electric lamps?
Answer:
Tungstan is a strong and metal having high melting point. This will not melt in high temperature. Because of this tungsten is used almost exclusively for filament of electric lamps.

(b) Why are the conductors of electric heating devices, such as bread- toasters and electric irons, made of an alloy rather than a pure metal?
Answer:
The resistivity of an alloy is generally higher than that of its constituent metals. Alloys do not oxidise (burn) readily at high temperatures. Because of this reason the conductors of electric heating devices, such as bread-toasters and electric irons made of an alloy rather than a pure metal.

(c) Why is the series arrangement not used-for domestic circuits?
Answer:
In case of series connection, when one component fails, the circuit it broken and none of the components work. But in case of parallel connection, circuit divides the current throughout the electrical gadgets. Because of this reason series arrangement is not used for domestic purposes.

(d) How does the resistance of a wire vary with its area of cross-section?
Answer:
Resistance is inversely proportional to its cross section. As area is increasing resistance is less. Thus resistance of wire is changing with area of cross section.

(e) Why are copper and aluminium wires usually employed for electricity transmission?
Answer:
Copper and Aluminium are good conductors of electricity and they have less resistance. Hence they are used in electricity transmission.

KSEEB SSLC Class 10 Science Chapter 12 Additional Questions and Answers

Question 1.
Draw a Neat diagram of Electric circuit for studying ohm’s law.
Answer:
KSEEB SSLC Class 10 Science Solutions Chapter 12 Electricity Ad Q 1

Question 2.
What is the S.I. Unit of resistivity?
Answer:
ΩM

Question 3.
How is fuse wire made of?
Answer:
It consists of a piece of wire made of a metal or an alloy of appropriate melting point, for example aluminium, copper, iron, lead etc.

Question 4.
Write the formula of Electric power.
Answer:
(Pquad =quad frac { { V }^{ 2 } }{ R } )

Question 5.
Give examples where we find heating of electric current.
Answer:
Electric heater, electric iron etc.

All Chapter KSEEB Solutions For Class 10 Science

—————————————————————————–

All Subject KSEEB Solutions For Class 10

*************************************************

I think you got complete solutions for this chapter. If You have any queries regarding this chapter, please comment on the below section our subject teacher will answer you. We tried our best to give complete solutions so you got good marks in your exam.

If these solutions have helped you, you can also share kseebsolutionsfor.com to your friends.

Best of Luck!!

Leave a Comment

Your email address will not be published.